Usage; Getting Started; Connecting/Positioning The Nasal Cannula - Invacare XPO2 XPO100 Manual Del Usuario

Invacare® XPO₂™

5 Usage

5.1 Getting Started

Using the XPO concentrator for the first time requires the internal
2
battery to be charged. To charge the battery, perform the following
steps:
Connect the AC power adapter A to the input power connector
1.
located on the side of the XPO
2. Connect the other end of the power adapter B into the power
source.
IMPORTANT
A concentrator will not turn on unless the battery is
charged.
– Connect the AC power to the XPO
and allow battery to fully charge prior to first use.
22
concentrator.
2
concentrator
2

5.2 Connecting/Positioning the Nasal Cannula

DANGER!
Risk of Injury or Death
The cannula can cause tripping, falling, or other injury if
improperly positioned and secured. To avoid injury or
death:
– The cannula MUST be routed and secured properly.
– DO NOT position the cannula around the neck.
Ensure the patient can move freely while wearing the
cannula.
– Avoid positioning cannulas across areas of high foot
traffic (i.e. aisles, doorways, hallways, etc.)
WARNING!
Risk of Injury or Death
To avoid choking and/or strangulation from tubing
entanglement:
– Keep children and pets away from nasal cannula and
tubing.
– Close supervision is necessary when the nasal cannula
is used by or near children and/or disabled persons.
CAUTION!
Risk of Minor Injury
To ensure proper breath detection and oxygen delivery:
– DO NOT use tubing length exceeding 25 ft (7.6 m).
– Use crush-proof oxygen tubing.
1148112-F~12