Ferroli FORCE W 60 Instrucciones De Uso página 227

FORCE W
TECHNICAL MENU
ONLY QUALIFIED PERSONNEL CAN ACCESS THE SERVICE MENU AND MODIFY PARAMETERS.
The Technical Menu can only be accessed after entering the code 4 1 8. It is valid for 15 minutes.
Configuration - Parameters Menu
16 parameters are available, indicated by the letter "b", which are not modifiable from Remote Timer Control.
Table. 4- Parameters - Configuration
Parameter Description
b01 Gas type selection
b02 Boiler type selection
b03 System water pressure protection selection
b04 Fan max. frequency in DHW
b05 Fan max. frequency in heating
b06 Fan min. frequency in DHW/heating
b07 Fan min. Frequency Offset
b08 Variable output Relay operation selection
b09 Post-Ventilation
b10 Boiler room pre-ventilation
b11 Boiler room post-ventilation
b12 Fume sensor
b13 Not implemented
b14 Fumes Max Temperature
b15 Fan type selection
b16 Pump antiblock operation time
Notes
1. Parameters with more than one description vary their function and/or range in relation to the setting of the parameter
given in brackets.
2. Parameters with more than one description are reset to the default value if the parameter given in brackets is modified.
EN
Range FORCE W 60
Natural Gas/LPG Natural Gas
1-9
0=Pressure switch
1=Flow switch 1 sec.
2=Flow switch 3 sec.
3=Flow switch 5 sec.
4=Flow switch 10 sec.
5=Pressure transducer
0-255 Hz 150 Hz
0-255 Hz 150 Hz
0-255 Hz 50 Hz
0-255 Hz 40 Hz
0=Burner lit
1=Legionella pump
2=Boiler room ventilation
3=Motor-operated shutoff valve
0-120 seconds
1-15 minutes
1-15 minutes
OFF = Deactivated,
ON = Enabled
--
0-125°C
--
0-20 seconds
cod. 3541Q760 - Rev. 00 - 02/2019
FORCE W 80 FORCE W 99
Natural Gas Natural Gas
7 7 7
0 0 0
190 Hz 195 Hz
190 Hz 195 Hz
50 Hz 45 Hz
40 Hz 40 Hz
0 0 0
30 30 30
1 1 1
1 1 1
ON ON ON
-- -- --
110 110 110
-- -- --
5 5 5
FORCE W 120 FORCE W 150
Natural Gas Natural Gas
7 7
0 0
225 Hz 240 Hz
225 Hz 240 Hz
45 Hz 50 Hz
40 Hz 40 Hz
0 0
30 30
1 1
1 1
ON ON
-- --
110 110
-- --
5 5
227