Ferroli FORCE W 60 Instrucciones De Uso página 232

Opening the front panel
Some internal components of the boiler can reach high temperatures able to
B
cause severe burns.Before carrying out any operation, allow these compo-
nents to cool or, alternatively, wear appropriate gloves.
To open the boiler casing:
1. Undo the screws A (see fig. 60).
2. Pull the panel B.
Proceed in reverse order to refit the front panel. Make sure it is correctly hooked to the upper fastenings and is correctly
positioned at the sides.
232
fig. 60- Front panel opening
cod. 3541Q760 - Rev. 00 - 02/2019
FORCE W
EN