General Description; Preparation For Use; Initial Checks; Instrument Power Supply - HT IRONMETER Manual De Instrucciones

2. GENERAL DESCRIPTION

The instrument carries out the following measurements:
 DC voltage
 AC TRMS voltage
 DC current
 AC TRMS current
 Resistance and Continuity test
 Frequency
 Duty Cycle
 Diode test
 Capacity
Each of these functions can be activated by means of the appropriate switch. The
instrument is also provided with a HOLD/ , MODE/ , RANGE and MAXMIN button. For
their use, please refer to § 4.2. The instrument is also equipped with a white light torch and
an Auto Power OFF function which automatically switches off the instrument 15 minutes
after the last time a function key was pressed or the rotary switch was turned.

3. PREPARATION FOR USE

3.1.

INITIAL CHECKS

Before shipping, the instrument has been checked from an electric as well as mechanical
point of view. All possible precautions have been taken so that the instrument is delivered
undamaged.
However, we recommend generally checking the instrument in order to detect possible
damage suffered during transport. In case anomalies are found, immediately contact the
forwarding agent.
We also recommend checking that the packaging contains all components indicated in §
6.3.1. In case of discrepancy, please contact the Dealer.
In case the instrument should be returned, please follow the instructions given in § 7.
3.2.

INSTRUMENT POWER SUPPLY

The instrument is supplied with 2x1.5V alkaline batteries type IEC AAA LR03, included in
the package. When the battery is flat, the symbol
the battery, see § 5.1.
3.3.

CALIBRATION

The instrument has the technical specifications described in this manual. The instrument's
performance is guaranteed for one year.
3.4.

STORAGE

In order to guarantee precise measurement, after a long storage time under extreme
environmental conditions, wait for the instrument to come back to normal condition (see §
6.2.1).
appears on the display. To replace
" "
EN - 4
IRONMETER