Maintenance Of The Gasoline Valve Sediment Deposit - MAG MG3000 Instrucciones De Uso

7 Install the spark plug pipette or cap and close the spark plug access cover,
fixing it with the screw.
NOTE: The spark plug must be tightened firmly. A loose spark plug may
overheat and even damage the engine. Similarly, over tightening may damage
the spark plug and, worse, the engine cylinder head thread.

8.4 Maintenance of the gasoline valve sediment deposit.

DANGER: Gasoline is extremely explosive and flammable. Smoking,
starting fires or generating any type of flame is completely forbidden when
performing this maintenance operation. Check the safety instructions regarding
gasoline on page 4 of this manual.
1 Close the gasoline valve by turning to OFF.
2 Using a spanner, unscrew the deposit by turning counter clockwise.
3 Remove the deposit, its o-ring
and the sediment strainer
4 Clean all the residues of the
deposit and the strainer.
5 Install the strainer, joint and
deposit in the fuel switch.
FUEL VALVE
SEDIMENT DEPOSIT
24
STRAINER.
JOINT
DEPOSIT