MAG MG3000 Instrucciones De Uso página 62

• The connected 230V equipments are not working:
YES
Check if the plugged
equipment is malfunctioning.
Is the thermal protection in
the OFF position?
NO
Does the voltmeter
indicate voltage?
NO
Possible causes to check in this order
Loose cable or connector
Brushes in poor condition
Damaged voltage
regulator.
28
YES
Place it in the "ON" position
Visually check the
equipment and control
panel wiring.
Replace brushes
MG3000 part 105 in drawing
MG5500 part 111 in drawing
MG6200 part 111 in drawing
Replace the voltage
regulator.
MG3000 part 103 in drawing
MG5500 part 118 in drawing
MG6200 part 118 in drawing