Sediment Deposit Maintenance (Models 2000-3000W) - GENERGY RENT Serie Instrucciones De Uso

7 Install the spark plug pipette or cap and close the spark plug access cover,
fixing it with the screw.
NOTE: The spark plug must be tightened firmly. A loose spark plug may
overheat and even damage the engine. Similarly, over tightening may damage
the spark plug and, worse, the engine cylinder head thread.
8.4 Sediment deposit maintenance
DANGER: Gasoline is extremely explosive and flammable. Smoking,
starting fires or generating any type of flame is completely forbidden when
performing this maintenance operation. Check the safety instructions regarding
gasoline on page 4 of this manual.
1 Close the gasoline valve by turning to the left.
2 Place a container under the carburetor to collect the pouring gasoline.
3 Using a spanner, unscrew the deposit by turning counter clockwise.
FUEL VALVE
SEDIMENT DEPOSIT
4 Remove the deposit and joint.
5 Clean all the residues of the deposit.
6 Install the sediment deposit again.
(models 2000-3000W).
29