Setting The Operating Mode; Sw Itching The Unit On And Off - RHOSS KCMS/PCM Instrucciones De Uso

r
S
F
S
U
S
H
S
I.2.3.3

Sw itching the unit on and off

Switc h the unit on or off by pressing the ON/OFF key.
Any operating mode is interrupted when switc hing from ON to OFF,
timers in progress are canc elled, the appliance and fan operating
modes are saved together with the louver position and the set
temperature value.
r (resistance) appears on
the display.
If the terminal unit has an
electrical resistance s et
YES by pressi ng the
TIMER UP key
nO
Then press the SET key to
confirm.
F (Frend) appears on the
display. If the termi nal unit
is a Frend, set YES by
pressing the TIMER UP
key.
Press the TIMER DOW N
nO
key to set NO.
Then press the SET key to
confirm.
U (val ve) appears on the
display. In the case of
Idrowall MPCP models
(without valve), set NO by
pressing the TIMER
DOWN key.
In the c ase of Idrowall
MPCV models ( with
nO
val ve), set YES by
pressing the TIMER UP
key.
Then press the SET key to
confirm.
H (hydronic) appears on
the display. If the unit is
integrated in a hydronic
system, set YES by
pressing the TIMER UP
key, other wise s et NO.
nO
Then press the SET key to
confirm.
The ti me appears on the
display.
The remote c ontrol is then
configured and c an be
used.
The mac hine automatic ally res tores all the oper ating modes saved
before shutdown when s witching from OFF to ON.
The sel ected settings appear on the
display when the unit is ON.
When this s ymbol appears on the dis play, it indicates
that the remote control is c ommunicati ng with the unit.
The ti me appears on the dis play when the
If the Timer was previousl y s et, the time and
ON and OFF appear on the displ ay when the
unit is OFF (see paragraphI.2.3.8).
I.2.3.4

Setting the operating mode

The unit oper ating mode is changed by pressing the
Mode key repeatedl y. The selected operati ng mode
appears on the displ ay.
FULL
AUTO
COOL
DRY
FAN
HEAT
I.2.3.5 Setting the louv er
Press the Louver key repeatedl y to s et one of the 5
positions available or ac tivate the SW ING function
for it to swi ng between the two positions defined by
the operating mode.
The sel ected position or the SWING function
appears on the displ ay.
29
SECTION I: USER
unit is OFF.
Automatic operati on
Cooling func tion
Dehumidificati on func tion
Fan onl y function
Heating function
Louver position
SWING func tion