Hammam/Turkish Bath" Function; Hammam/Turkish Bath" Button - effegibi Logica Manual De Uso

6

"HAMMAM/TURKISH BATH" FUNCTION

6.1

"HAMMAM/TURKISH BATH" BUTTON

Press the "Hammam/Turkish bath" button to start generating steam.
Steam will start coming out after about 15/20 minutes.
PLEASE NOTE: when it starts working for the first time, before it emits steam, the Aquasteam generator will
automatically clean the boiler, a process that takes about 15 minutes.
During this phase the "Hammam/Turkish bath" icon will flash.
If you press the "Hammam/Turkish bath" button while it is functioning, this will interrupt steam emission.
PLEASE NOTE: after steam emission has been interrupted for about 30 minutes, the Aquasteam smart
electronic system automatically switches to the boiler empty and clean function.
This operation takes about 15 minutes and leaves the Aquasteam generator clean and ready
for the next use.
During the automatic rinsing phase, the "Hammam/Turkish bath" icon will flash.
The "Hammam/Turkish bath" boiler switch-off function immediately stops steam production.
If the Hammam is not started up after 30 minutes, the generator will switch to boiler-empty mode, otherwise,
if the boiler is still full and hot, pressing the "Hammam/Turkish bath" button will produce steam in a short time.
DO NOT CUT OFF THE ELECTRIC POWER TO THE GENERATOR for about an hour after steam emission has been
interrupted.
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes
OPERATING AND MAINTENANCE MANUAL FOR LOGICA
without having to give prior notice or replace this manual.
EN
13