Electrical Protection - Astralpool PRO-ELYO INVERBOOST Serie Manual Del Usuario

6.4 Electrical protection

NOTE
The swimming pool heat pump must be connected ground wire well, although the unit heat exchanger is
electrically isolated from the rest of the unit. Grounding the unit is still required to protect you against short
circuits inside the unit .Bonding is also required.
6.5 Installation of the display deportee
Photo(1) Photo(2)
- The side with plug connects with the control panel (photo1)
- The other side of the signal wire. (photo2)
- Open the wiring panel and put the side without plug through the electrical box. (photo3,4)
- Insert the wiring into the disignated position
6. 6. 6. Electrical Electrical Electrical Wiring Wiring Wiring
Photo(3) Photo(4)
(upper right corner) on the PC board. (photo5)
- 55 -
Photo(5)