Bluetooth® Audio Playback; Music Playback Using Bluetooth Wireless Technology; Remote Control Operation; Pairing With The Unit (Initial Registration) - Pioneer X-HM32V-K Manual De Instrucciones

Bluetooth® Audio playback
Chapter 10:
Bluetooth
Music playback using Bluetooth wireless
technology
Bluetooth wireless technology
enabled device:
Cell phone
Bluetooth wireless technology
enabled device:
Digital music player
Device not equipped with Bluetooth
wireless technology:
Digital music player
Bluetooth
(commercially available)
Music data

The unit is capable of playing back music stored on Bluetooth
capable devices (cell phones, digital music players etc.)
wirelessly. You can also use a Bluetooth audio transmitter
(sold separately) to enjoy music from devices that do not have
Bluetooth functionality. Please refer to the user's manual for
your Bluetooth capable device for more details.
Note
®
• The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by PIONEER CORPORATION is under
license. Other trademarks and trade names are those of
their respective owners.
• The Bluetooth wireless technology enabled device must
support A2DP profiles.
• Pioneer does not guarantee proper connection and
operation of this unit with all Bluetooth wireless
technology enabled devices.
®
Audio playback
+
® audio transmitter
   

Remote control operation

The remote control supplied with this unit allows you to play
and stop media, and perform other operations.
Note
• The Bluetooth wireless technology enabled device must
support AVRCP profiles.
• Remote control operations cannot be guaranteed for all
Bluetooth wireless technology enabled devices.

Pairing with the unit (Initial registration)

In order for the unit to playback music stored on a Bluetooth
capable device, pairing must first be performed. Pairing
should be performed when first using the unit with the
Bluetooth capable device, or when the pairing data on the
device has been erased for any reason.
Pairing is a step required to allow communication using
Bluetooth wireless technology to be carried out.
• Pairing is only performed the first time that you use the
unit and the Bluetooth capable device together.
• In order to allow communication using Bluetooth
wireless technology to take place, pairing must be
performed on both the unit and the Bluetooth capable
device.
• After pressing the BT AUDIO and switching to BT
AUDIO input, perform the pairing procedure on the
Bluetooth capable device. If pairing has been performed
correctly, you will not need to perform the pairing
procedures for the unit as shown below.
Please refer to the user's manual for your Bluetooth capable
device for more details.
1 Press the STANDBY/ON and turn the
power to the unit on.
2 Press the BT AUDIO.
The unit switches to BT AUDIO and PAIRING will be
displayed.
Turn on the power to the Bluetooth capable
3
device that you wish to pair with, and perform
pairing procedure on it.
Note
• This unit will be displayed as "X-HM32V" on all Bluetooth
capable devices that you have.
Pairing will start.
• Place the Bluetooth capable device close to the unit.
10
33
En