Getting started
Sound controls
Equalizer
When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
FLAT
A flat and basic sound.
A powerful sound that
ACTIVE
emphasizes low and high tones.
A sound that allows the radio or
DIALOGUE
vocals to be heard more easily.
A sound that can be enjoyed
NIGHT
at night even with lower volume.
P.BASS control
Each time the P.BASS button on the remote control is
pressed, the bass frequency mode will change.
Note
• P.BASS control is initially set to ON.
Bass/treble control
Press the BASS/TREBLE, then press
bass or treble.
Note
• The EQUALIZER and P.BASS cannot operate
simultaneously. The most recently selected of these two
functions will be the one used.
• BASS/TREBLE can operate alongside either the
EQUALIZER or P.BASS.
When one of the above two functions is
selected, the function that is not selected
will be displayed as follows.
1
When P.BASS setting (ON/OFF) is changed
• EQUALIZER : FLAT
2
When EQUALIZER setting is changed
• P.BASS : OFF
Setting the wake-up timer
Used to change the existing timer setting, or to set a new
timer.
1
2
3
then press ENTER.
4
press ENTER.
5
source, then press ENTER.
• DVD/CD, FM, USB/
6
press ENTER.
7
ENTER.
/
to adjust the
8
ENTER.
• Set the time to finish as in steps 7 and 8 above.
9
press ENTER.
10 Press
standby mode.
• The TIMER indicator lights up.
Press
STANDBY/ON to turn the power on.
Press and hold CLOCK/TIMER.
Press
to select "ONCE" or "DAILY",
ONCE – Works once only at a preset time.
DAILY – Works at the preset time on a preset day.
Press
to select "TIMER SET", then
Press
to select the timer playback
, BT AUIDIO, AUDIO IN and
iPod
LINE can be selected as the playback source.
Press
to select the timer day, then
Press
to set the hour, then press
Press
to set the minute, then press
Adjust the volume press
STANDBY/ON to enter the power
04
, then
VOLUME +/–
17
En