Putting On The Belt - Beurer EM 39 Manual De Instrucciones

CAUTION:
• Do not use the device if it is not operating correctly, if it has been dropped, if it has
fallen into water or if it has been damaged.
• If you feel pain or have an unpleasant feeling, stop treatment and consult your doc-
tor.
• Do not place the belt on:
– Injured or inflamed areas of skin, such as wounds, spots, rashes or reddening.
– Surgical scars in the process of healing.
– Burning or numb areas of skin.
– Swellings, peeling skin, or other sensitive points.
• Ensure that during stimulation, no metallic objects can contact the electrodes, as oth-
erwise localized burns can occur.
• Do not switch the device on until the belt has been fixed on the body.

6.1 Putting on the Belt

1. Before putting on the belt, remove any residue of skin cream or ointment and make sure that
your skin is clean and free of oil. Do not place the belt on injured or inflamed areas of the skin,
such as wounds, spots, rashes or reddening.
2. Before use, dampen the integrated silicon electrodes with water.
3. Position the electrodes on the area of the body to be treated. If your back aches at waist level;
you are suffering from pain in the upper treatment area. Position the belt so that the middle of
the belt is at waist level.
9