Removing And Installing The Metal Grease Filter - Gaggenau AL 400 721 Manual De Instrucciones

In the dishwasher:
Note: Slight discoloration is possible when cleaning
the dishwasher. This does not affect the metal grease
filter's functioning.
▯
Do not clean extremely dirty metal grease filters
with dishes.
▯
Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
By hand:
Note: You can use a special grease solvent if soiling
is stubborn. You can order it via the online shop.
▯
Soak the metal grease filters in hot soapy
solution.
▯
Use a brush for cleaning and then rinse the filters
well.
▯
Allow the metal grease filters to drip dry.
Removing and installing the metal
grease filter
Open the filter cover
1 Grip filter cover in the middle and pull upward.
2 Fold the filter cover forward.
Uninstalling metal grease filter
1 Open the lock and fold the metal mesh grease
filter forward.
2 Take metal mesh grease filter out of the holder.
Notes
‒ Grease can accumulate in the bottom of the
metal mesh grease filter.
‒ Do not hold metal mesh grease filter at an
angle, otherwise grease will drip out.
3 Clean the metal mesh grease filter.
Clean the grease troughs
For better cleaning, it is possible to remove the
grease troughs. The grease troughs can be cleaned in
the dishwasher.
1 Remove the grease troughs.
2 Clean the grease troughs.
3 Insert the grease troughs again.
13