Connections - Teac TN-550 Manual Del Usuario

A
R
|
Amplifier
A
Grounding connector (|)
Use the grounding wire of the included RCA audio
cable to connect this connector to the grounding con-
nector of the amplifier, for example.
o This is NOT an electrical safety ground.
o If connecting the grounding wire of the audio
cable to the grounding connector of this unit does
not reduce noise, disconnect the grounding wire
and check the sound again. Use the method (con-
nected/disconnected) that has the least noise.
8

Connections

D
Included AC adapter
C
V Precautions when making
L
connections
o Do not plug the unit in until after making
all connections.
o Carefully read the manuals of the devices
that you are connecting and follow their
instructions when making connections.
B
Analog audio output connectors (L/R)
The cartridge signal is output directly through the ana-
log audio output connectors (L/R).
Use the included RCA audio cable to connect other
equipment to the output connectors of this unit.
Use these when connecting to an amplifier or other
equipment that has PHONO input connectors. When
using the included cartridge (equivalent to MM), con-
nect them to PHONO input connectors compatible
with MM type input. When using an MC cartridge, con-
nect them to PHONO input connectors compatible
with MC type input. The PHONO input connectors of
some equipment might be settable for use with either
MM or MC type input.
For details, refer to the operation manual of that
equipment.
o The TN-550CA/B does not include a cartridge.
C
DC input connector
After completing all other connections, connect the
included AC adapter to this connector.
Confirm that the power plug of the AC adapter is
plugged into a power outlet.
o Unplug the power cord from the outlet when you
are not planning to use the unit for an extended
period of time.
o Do not use any AC adapter other than the one
included.
V Be sure to connect the power cord to
an AC outlet that supplies the correct
voltage. Connection to an outlet that
supplies incorrect voltage could cause
fire or electric shock.
Hold the power plug when plugging it
into an outlet or unplugging it. Never
pull or yank on the power cord.
Unplug the power cord from the outlet
when you are not planning to use the
unit for an extended period of time.
D
STANDBY/ON button
Press the STANDBY/ON button to turn the unit on or
put it in standby.