Examining the Cylinder
Before using and/or filling the cylinder:
1.
Examine the outside of the cylinder for the following:
dents or dings
»
oil or grease
»
any other signs that the cylinders may be unsafe for use
»
2.
Check the cylinder for fire or thermal damage.
3.
Examine the cylinder fill connector for:
debris, oil or grease
»
»
noticeable signs of damage
»
signs of excessive heat or fire damage
»
signs of corrosion inside the valve
If any of the above conditions exist, call your homecare provider to replace the cylinder.
UltraFill User Manual
11