Special Picture/Sound Effects - Rotel RDV-1050 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

;
3 Press ENTER
. Subtitles are displayed in
the selected language. The subtitle selec-
tion window disappears.
NOTES: An SVCD disc can have up to
four subtitles. Pressing
/
through those channels regardless of
whether the subtitles are recorded or not.
The subtitle selection window will auto-
matically disappear if you do not change
the subtitle for several seconds.
For DVD VIDEO, the selected language
may be abbreviated on the TV screen. See
"Appendix B: Table of languages and their
abbreviations".
Changing the Audio
Language or Sound (AUDIO)
The audio selection setting allows you to change
the audio language of a movie, or to listen to
karaoke with or without the vocal. At the be-
ginning of the part where multiple audio tracks
are recorded,
appears on the TV screen
(except when the ON SCREEN GUIDE pref-
erence is set to OFF).
1 During playback, press AUDIO
audio selection window appears on the TV
screen.
jw
2 Press
/
or AUDIO to select the
desired audio. Each time you press
or AUDIO, the audio changes.
For DVD VIDEO (example)
For SVCD
For Video CD
;
3 Press ENTER
. The selected audio is heard
and the audio selection window disappears.
19
NOTES: The audio selection window will
automatically disappear if you do not
change the audio within several seconds.
For DVD VIDEO, the selected language
may be abbreviated on the TV screen. See
jw
cycles
"Appendix B: Table of languages and their
abbreviations".
Simply press the AUDIO-fs/Rate button
]
, do not hold it down. If this button is
pressed and held for a few seconds the
sampling frequency and quantization bit
length is shown in the display window.
Selecting a Scene Angle
(ANGLE)
You can view a variety of scene angles if the
DVD VIDEO disc contains "multi-angle" parts,
where multiple cameras were used to shoot
the same scene from different angles. At the
beginning of a "multi-angle" part,
pears on the TV screen (except when the ON
SCREEN GUIDE preference is set to OFF).
1 During playback, press ANGLE
angle selection window appears on the TV
screen.
]
. The
2 Press
desired angle. Each time you press
or ANGLE, the angle changes.
3 Press ENTER
/
You will see the picture from the selected angle.
The angle selection window disappears.
NOTE: The angle selection window will
automatically disappear if you do not
change the angle for several seconds.
6
jw
/
or ANGLE to select the
;
.
Special Picture/Sound
Effects
To Zoom In On Pictures
1 During playback or while paused, press
\
ZOOM
. Pressing ZOOM causes the
RDV-1050 to zoom in on the image. At the
top left of the screen, the information for
the current magnification appears for about
5 seconds. Each time you press ZOOM, the
magnification is doubled (1.8, 4, 8, 16, 32
and 64 times).
When a picture of a DVD VIDEO disc is
ap-
viewed on a normal TV screen (4:3, Letter
Box), black bars may appear at the top and
bottom of the screen. In this case, if you select
the "ZOOM x1.8" mode, the black bars be-
. The
come almost invisible. When a 1:2.35 or
1:1.85 DVD VIDEO source is played back,
however, the black bars are visible on the
screen.
jwqk
2 Press
zoomed position.
To return to the normal playback press
/
;
ENTER
.
NOTE: When you are zoomed in on a pic-
ture the image may look coarse.
English
to move the

Publicidad

Tabla de contenido
loading

Tabla de contenido