Rotel RDV-1050 Manual De Instrucciones página 3

Figure 1: RR-DV96 Remote Control
1
TV/DVD switch
Switches the RDV-1050 between TV control mode
and the DVD player control mode.
2
OPEN/CLOSE button
Opens and closes the disc tray.
3
Repeat button
Switches the RDV-1050 among "no repeat" mode,
"repeat 1" mode and to "repeat all" mode.
4
Numeric buttons
In DVD/CD mode use these to select a title or track
number, to enter a time for the Time search. In TV
mode they are used to select a TV channel.
5
SUBTITLE button
Used to activate the on-screen subtitle selection dis-
play and to turn the subtitle on or off (for DVD VIDEO).
6
ANGLE button
Changes camera angles during playback of a DVD
VIDEO disc containing multiple camera angles.
7
PAGE button
Lets you select from the available still pictures when
playing an DVD AUDIO disc.
8
TITLE/GROUP button
Used to select a Title when playing a DVD VIDEO
disc, and to select a Group when playing a DVD
AUDIO disc.
9
/PREVIOUS button
Skips back a chapter, title or track. Also used for the
page selection of a menu screen (for DVD VIDEO/
Video CD). Holding down this button during play-
back rapidly scans to earlier scenes.
0
■ (STOP)/CLEAR button
Stops playback. Also used to erase all the programmed
tracks for the program play.
-
/SLOW – button
[
During playback lets you reverse disc play at 1.5 to
60 times normal speed. When disc play is paused
press to reverse disc play at 1/2 to 1/32 normal
speed.
=
TOP MENU button
Press to display a menu to select specific scenes on
a disc.
q
VOLUME –/CURSOR
When in TV mode press to reduce volume. When in
DVD mode press to select an item from a menu or
on-screen display, or to change the setting of an item
in the on-screen display.
w
CHANNEL –/CURSOR
When in TV mode press to go to a lower channel.
When in DVD mode press to select an item from a
menu or on-screen display, or to change the setting
of an item in the on-screen display.
e
CHOICE button
Displays the DVD set-up menu. Is also used when
selecting parental lock settings
r
Infrared signal output window
Point this toward the remote sensor on the front panel
when pressing buttons.
t
DVD POWER button
y
TV POWER button
Press to turn the RDV-1050 or your TV on or off
(standby).
3
1
TV / DVD switch
'
PAL/NTSC button
2
OPEN/CLOSE button
3
REPEAT button
4
Numeric buttons
5
SUBTITLE button
6
ANGLE button
7
PAGE button
8
TITLE / GROUP button
9
0
(STOP) / CLEAR button
-
=
TOP MENU button
q
VOLUME – / CURSOR
w
CHANNEL – / CURSOR
e
CHOICE button
u
RETURN button
Returns to the previous menu (for SVCD/Video CD).
i
DIMMER button
Adjusts the brightness or turns off the display.
o
VSS button
Turn on/off the simulated Virtual Surround Sound
system.
p
+10/MUTING button
Used when selecting or programming numbered tracks
or scenes above 10. Also used to mute the TV sound.
[
TV/VIDEO/CANCEL button
Used to switch inputs when controlling the TV. Used
to remove selected items when setting up programmed
Button
track play. Also used when setting up the RR-DV96
to control the TV.
]
AUDIO/fs/RATE button
Press and release to select various audio options during
disc play. Press and hold for a few seconds to select
Button
the sampling frequency and bit length.
\
ZOOM button
When viewing video discs allows the image on the
screen to be enlarged from 1.8 to 64 times normal
size.
a
VFP/PROG SCAN button
Press and release to select the VFP function which
sets video play properties. Press and hold for a few
seconds to select progressive or interlace scan out-
put. (With U.S. version the Video Signal Selector switch
o
must be set to Remote to use this function. See
the Audio/Video Connections section.)
s
/NEXT button
}
Skips forward a chapter, title or track. Holding down
this button during playback advances playback rap-
idly.
/ PREVIOUS button
/ SLOW – button
button
button
r
Infrared signal output window
t
DVD POWER button
y
TV POWER button
u
RETURN button
i
DIMMER button
o
VSS button
p
+10 / MUTING button
[
TV/VIDEO / CANCEL button
]
AUDIO / fs/RATE button
\
ZOOM button
a
VFP / PROG SCAN button
s
/ NEXT button
d
(PAUSE) button
f
(PLAY)/ SELECT button
g
/ SLOW + button
h
MENU button
j
CHANNEL + / CURSOR
k
VOLUME + / CURSOR
l
ON SCREEN button
;
ENTER button
d
(PAUSE) button
,
Pauses playback.
f
(PLAY)/SELECT button
/
Starts playback. SELECT function is not used.
g
/SLOW button
]
During playback lets you advance disc play at 1.5
to 60 times normal speed. When disc play is paused
press to advance disc play at 1/2 to 1/32 normal
speed.
h
MENU button
Displays various menus that let you select items
from the disc.
j
CHANNEL +/CURSOR
When in TV mode press to go to a higher channel.
When in DVD mode press to select an item from a
menu or on-screen display, or to change the setting
of an item in the on-screen display.
k
VOLUME +/CURSOR
When in TV mode press to increase volume. When
in DVD mode press to select an item from a menu or
on-screen display, or to change the setting of an item
in the on-screen display.
l
ON SCREEN Button
Displays various menus on the screen that let you select
control and programing functions.
;
ENTER button
Press to accept various selections such as channels
selected with the numeric buttons or in some program-
ming steps.
'
PAL/NTSC button
European Version Only. Select a PAL or NTSC out-
put signal when the Video Signal Selector switch
is set to REMOTE.
English
button
button
Button
Button
[