Select Water Level - Maytag 4GMVWC100 Manual De Uso Y Cuidado

7, Select WATER LEVEL
Y- water level
medium
super
plus
Select the Water Level setting most suitable for your load.
Small will add a low amount of water for smaller loads and
Super Plus will add the most amount of water for large or
bulky loads. Items need to move freely.
8= Select TEMPERATURE
temperature
all cold rinses
cool warm
hot
Once you select a cycle, select the desired wash temperature
by turning the Temperature knob to the appropriate setting
based on your load. All rinses are cold.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your garments.
Not ::
Some cold water is added to save ::iWhites and pastels
energy. This will be cooler than ::i Durable garments
your hot water heater setting. Heavy soils
Warm
Some cold water will be added, so
this will be cooler than what your
Cool
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Bright colors
Moderate to light soils
Colors that bleed
or fade
9, Select OPTION (on some models)
U fabric softener
added
o I
no yes
If you are using fabric softener, be sure to set Fabric
Softener-Yes option.
O, Press START/Pause/Unlock
to begin wash cycle
I>start
pause/unlock
O holdJsec.
to cQncel
Press the START/Pause/Unlock button to start the wash cycle.
When the cycle has finished, the DONE indicator will light.
Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the
washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Then close lid
and press START/Pause/Unlock again to restart the cycle.
If lid is left open for more than 10 minutes, the water will pump
out automatically.
Cold
This is the temperature from your Dark colors that
faucet. If your tap cold water is bleed or fade
very cold, warm water may be Light soils
added to assist in soil removal
and help dissolve detergent.
8