Technical Data; Noise/Vibration Information - Bosch GBH 2 S Manual De Instrucciones

Technical data

Model
Type nº
Speed control
Power input [W]
Power output [W]
Impact rate [min ]
–1
Impact energy per stroke [J]
Nominal speed rotation (approx.) [min
Tool mount
Spindleneckdiameter (EuroNorm) [mm]
Chisel adjustment
Drilling output (max.) [mm]:
Weight (without access.) [kg]
Protection Class
Product elements
1 Dust cap
2 Locking sleeve
3 Cooling vent
4 Bit stop
5 Auxiliary handle
6 Release button
7 Mode selector switch
8 On/Off switch
9 Interlock
Not all the accessories illustrated or described are
included in standard delivery.

Noise/vibration information

Measured values determined according to EN
50144-1(1998).
Typically the A-weighted noise levels of the tool
are: Sound pressure level: 88 dB (A); Sound
power level: 101 dB (A).
Wear ear protection!
The typical weighted acceleration is 11 m/s
Inteded use
The machine is intended for hammer drilling in con-
crete, brick and stone. It is also suitable for drilling
without impact in wood, metal, ceramic and plastic.
]
–1
Masonry
(corebi)
Stone
Wood
Steel
.
2
GBH 2-S
0 611 226 0..
no
680
390
4850
2,4
870
SDS-plus
Ø43
-
68
24
30
13
2,4
/ II
GBH 2-24S - This machine is as well as for the
chiselling of plaster and other light chiselling work.
For your safety
Working safely with this machine
is possible only when the operat-
ing and safety information are read
completely and the instructions
contained therein are strictly followed. In ad-
dition, the general safety notes on page 18
must be observed. Before using for the first
time, ask for a practical demonstration.
The machine must not be damp and
must also not be operated in damp sur-
roundings.
If the cable is damaged or cut through
while working, do not touch the cable but
immediately pull the mains plug. Never
use the machine with a damaged cable.
Always wear goggles, protective gloves
and robust shoes when using the ap-
pliance.
Wear ear protection to prevent damage
to your hearing.
• Only connect the power plug when the tool
is Off.
• Disconnect the power plug after use.
GBH 2-24 DSE
0 611 228 6..
yes
680
390
0...4850
2,4
0...870
SDS-plus
Ø43
36 posições
68
24
30
13
2,4
/ II
14