Fork Rebound Adjustment; Setting The Fork Spring Preload - SHERCO 250 SEF Manual De Propietario

250-300 SEF/R
Adjusting the chassis (continued)

FORK REBOUND ADJUSTMENT

1

SETTING THE FORK SPRING PRELOAD

94
The adjusting screws
of the fork when it rebounds. Turning the screws
clockwise increases the hydraulic force (and vice
versa).
The adjustment screws
of the upper fork legs.
Turn the screw clockwise to the stop then go
1
back the number of clicks required.
Rebound Sachs
Gold Series USD Ø48mm
Rebound WP
suspension USD Ø48mm
The adjusting nut allows the preload of the
Spring to be adjusted. Turning the nut clockwise
increases the preload (and vice versa).
Turn the nut with a wrench counterclockwise until
it stops and then turn it the number of turns
required.
Suspension spring
preload WP USD
Ø48mm
determine the behavior
1
are located at the end
1
12 clicks
Comfort
Standard
Sport
Comfort 2 turns
Standard 4 turns
Sport 6 turns
18
clicks
13
clicks
10
clicks