Adjusting The Steering Head Bearing Play; Cleaning The Chain; Checking The Chain Tension - SHERCO 250 SEF Manual De Propietario

ADJUSTING THE STEERING HEAD BEARING PLAY

1

CLEANING THE CHAIN

Regularly cleaning the chain considerably increases its service life.
Clean the chain and apply chain lubricant.
Minerva Chain Cleaner

CHECKING THE CHAIN TENSION

3
2
Place the motorcycle on a suitable stand.
Loosen screws and
1
Loosen or tighten the nut
steering bearing play.
Steering nut
Tighten the screws
1
SACHS top
fork screws
WP top fork screws
Tighten screw
2
Top clamping
screw
Check the play of the steering head bearings.
( p.102)
☛
Remove the bike from the stand.
The bearings should be greased at least once a
year with a good quality grease.
Minerva aerosol chain lub
Place the motorcycle on a suitable stand
Push the chain up and measure the chain
movement as shown in the diagram.
Chain tension
If the chain tension is not correct, see how to
adjust the chain. ( p.104)
☛
Otherwise, remove the bike from the stand.
2
to adjust the
3
M20 30Nm
M8x35 12Nm
M8x35 17Nm
Loctite
M8x30 17Nm
243
50mm...53mm
®
™
103