Removing The Rear Wheel; Reinstalling The Rear Wheel - SHERCO 250 SEF Manual De Propietario

REMOVING THE REAR WHEEL

2 1
3

REINSTALLING THE REAR WHEEL

1
2
Place the motorcycle on a suitable stand.
- Unscrew the nut
1
- Tap the axle out using a nylon hammer.
3
- Remove the axle.
- Move the wheel as far forward as possible.
- Remove the chain and wheel.
ATTENTION
Do not operate the rear brake pedal when the rear
wheel is removed.
Check that the brake disc is not dirty or
contaminated with oil or grease. If it is, clean the
disc with brake cleaner.
Brake cleaner
Install the two spacers
they are positioned correctly.
and remove the adjuster.
Minerva brake cleaner
and degreaser
and and make sure
1 2
2
109