Mattress Controls; Additional Controls On The Nimbus 3 Professional Mattress - GETINGE GROUP Arjohuntleigh NIMBUS 3 Instrucciones De Uso

Mattress Controls All
Transport Control
CPR Control
The CPR control is used to deflate the mattress for packing and storage.

Additional Controls on the Nimbus 3 Professional Mattress

Head Section Deflate
Control
and
Nimbus 3
have the following two controls, situated at the foot end
of the mattress:
FAST DEFLATE
CPR Control
This sets the mattress into
support surface is equally pressurised and the pump and
tubeset can be removed. In this mode the mattress will
support the patient for up to 12 hours.
The CPR (Cardio-Pulmonary Resuscitation) Control
provides a means of rapidly deflating the mattress to
allow normal resuscitation procedures to be carried out.
The following two controls are on the opposite side of
the mattress to the CPR/Transport Control:
This is a two-position rotary-action control at the head
end of the mattress:
•
Dynamic (Normal) Mode
Section are inflated at a constant pressure and the
remaining 17 cells alternate.
•
TriCell Head Section Deflate
Head Section are fully deflated to assist with patient
care management, and the Shoulder Support Cell
(next to the Head Section) is inflated to a constant
14
Nimbus 3 Professional
NORMAL
1
TRANSPORT
2
3
Transport Control
TRANSPORT
. The three cells in the Head
. The three cells in the
mattresses
NORMAL
TRANSPORT
mode where the