f. Wiring
*
*
WEVPMS 253 BIS
CAUTION
6. DIRECTIONS FOR USE
a. Using the videophone
mately 30 seconds. When the visitor has been identified, press the
Note: The
button only needs pressing once to communicate with the street unit.
the
button to turn the monitor off.
To prolong the image a further 30 seconds, press the
The latch or lock is activated when the
It is advisable to use an EXTEL strike or lock with mechanical memory (like all EXTEL strikes and locks),
it will remain unlocked after the end of the electric pulse.
To activate an automatic control, press the
NB: the additional monitor only controls the electric latch or lock.
It should be noted that the opening functions are only valid when the screen is switched on. The image disappears
briefly when the command is transmitted.
To control lighting, press the
To call internally the (optional) WEVPMS 253 BIS additional monitor, press the button
turns blue on the monitor called to specify an intercom call and a ring tone sounds. If during an internal com-
munication (Intercom) you receive a call from the roadside panel, then the indicator
1
25m 25
2 x 6/10
*
1
20m
6 x 6/10
button is pressed.
button.
button.
100m
**
2 x 1,5 mm
e
e
button to talk.
button.
* : option
** : - Or higher, for exam-
ple 1.5 mm
2
, for impro-
ved image quality.
2
. Then the indicator
turns green.
-