The Display Description Of Controls And Symbols; Display Icons Key - Dal Zotto Edy Manual Del Usuario

The Display DescripTion of conTrols anD symbols

ON/OFF
BUTTON

Display icons key

indicates the presence of an alarm.
On: indicates the presence of an alarm
Off: indicates the absence of alarms
Flashing: indicates the deactivation of the depression
sensor.
indicates the room temperature status
Off = the T° read by the probe is over the set temperature
set
On = the T° read by the probe is below the set temperature
ign-plug
Off = ign-plug active
On = ign-plug deactivated
Flashing = ignition phase
it indicates functioning of the fumes motor
Off = fumes motor not working
On = fumes motor working
Flashing = breakdown
it indicates functioning of the tangential fan
Off = not working
On = working
Flashing = The motor is operating in COmFOrT momde
1
(where present)
Not used
2
Display OF variOUs
TexT messages
TemperaTUre seTTiNg
it indicates weekly programming operation
indicator on = weekly programming active
indicator off = weekly programming not active
indicates the stby function
Off = stby deactivated
On = stby activated
Not used
it indicates the communication between remote control
and stove. every time a key is pressed on the remote
control the indicator must switch on. if the indicator is
always on it indicates that the communication between
remote control and stove is blocked.*
Not used
additional ducted thermostat input status:
On: closed contact (to be reached)
Flashing: the motor is running at minimum, in modulation
mode (input=open)
it indicates the operation of the pellet feed motor.
Off = pellet feed motor deactivated
On = pellet feed motor active.
ENGLISH
Display
OF pOwer
OperaTiON pOwer aDJUsTmeNT
35