Sony HT-CT500 Manual De Instrucciones página 91

x After pairing
Sound transmission is established between the
paired subwoofer and S-AIR sub unit(s) only.
Your room
This subwoofer
ID A
ID A
S-AIR sub unit
Pairing
To perform pairing
1
Place the S-AIR sub unit that you want
to pair near the subwoofer.
2
Match the IDs of the subwoofer and the
S-AIR sub unit.
• To set the ID of the subwoofer, see "To set
the ID of the subwoofer" (page 87).
• To set the ID of the S-AIR sub unit, refer
to the operating instructions of the S-AIR
sub unit.
YELLOW BLUE
DISPLAY
C, X, x, c,
HOME
RETURN/
EXIT MENU
PRESET REPLAY
TUNING
Neighbor
No transmission
ID A
S-AIR sub unit
RED GREEN
GUI
GUI MENU
MENU
TOOLS/
OPTIONS
ADVANCE PRESET
TUNING
3
Press GUI MENU.
"GUI MENU" appears in the front panel
display of the subwoofer and the GUI menu
appears on the TV screen.
4
X/x
Press repeatedly to select
[Settings], then press
The settings menu appears.
5
X/x
Press repeatedly to select [S-AIR],
then press .
The S-AIR menu appears.
Note
• When the S-AIR transmitter (not supplied)
is not inserted into the subwoofer, [S-AIR]
cannot be selected.
6
X/x
Press repeatedly to select [Pairing
Start], then press
The message, [Put the S-AIR sub unit near
the S-AIR main unit, and turn on power.
Start pairing], appears on the TV screen.
The subwoofer is ready to start pairing.
7
C/c
Press to select [Yes], then press
.
The subwoofer starts pairing and the
message, [Pairing. Do the pairing operation
with the S-AIR sub unit.] appears.
8
Start pairing of the S-AIR sub unit.
Refer to the operating instructions of the
S-AIR sub unit.
Notes
• Perform pairing within five minutes in
step 6. If you do not, pairing is recognized
as failed, and the screen changes
accordingly. In this case, see "If pairing
fails" (page 92).
• When sound transmission is established,
the message, [Pairing complete. To
perform pairing to an other S-AIR sub
unit, select "Continue".] appears.
9
C/c
Press to select [Finish] or
[Continue], then press
• [Finish]: finishes pairing.
• [Continue]: Continues to perform
pairing to another S-AIR
sub unit.
c
or .
.
.
continued
91
US