g. 1
C
A
g. 2
C
B
g. 3
D
D
COVERING INSTALLATION
A
B
A
B
B
1) VERSION WITH CERAMIC SIDES AND
TOP
Fig. 1
The stove is delivered (Fig. 1) with the following external com-
ponents already installed:
• metal rear sides (A)
• metal frames for xing the ceramic side elements (B)
• cast iron upper grille (C)
The pieces indicated below are packaged separately.
• 4 ceramic side elements (D - Fig. 3)
• 1 upper horizontal ceramic element (E - Fig. 7)
• 1 ceramic top (F - g. 9)
• 16 milled pins M4
• 16 washers M5
• 4 rubber pads (M)
• 4 brass washers
• 2 screws T.E. M6x10
To t proceed as follows:
Fig. 2
Remove the two metal rear sides (A) screwed onto the struc-
ture.
Remove the metal frames (B) by loosening the screws.
Remove the cast iron upper grille (C) screwed onto the struc-
ture.
Fig. 3
Attach the vertical ceramic elements (D) to the metal frames
(B) by inserting the M4 knurled bolts with washers provided
through the relevant slots.
- 38
-