Evolution HULK PETROL COMPACT24HP Manual De Instrucciones página 18

Fig. 11
Fig. 12
18
GENERAL OPERATING ADVICE
• Ensure that bystanders are kept at a safe distance
from compacting operations. If necessary cordon
off the work area and post WARNING notices.
• Plan your work, and the path you intend the machine
to travel, before you start compacting operations.
• Survey the working area before you begin and
remove or otherwise neutralise any obstructions/
obstacles that could pose a danger.
• Ensure you have all the correct PPE and know how
to use it.
• The compactor will travel forwards under its own
power. Gentle inputs from the operator on the
machines handle are all that is necessary to 'steer'
the machine. The operator should hold the anti-
vibration handle grip with both hands, and the hands
should be positioned as far apart as possible.
• Several passes over the work area may be required
to compact the material to the desired density.
• If the work area is sloped, work up and down the
sloping surface, not across
MAINTENANCE
HULK PETROL
Regular maintenance is essential to keep your
machine and its accessories in serviceable condition.
We recommend that only competent operators who
have experience in servicing and maintaining petrol
engines attempt these procedures. If in doubt have
the machine serviced at an Evolution approved
Service Centre.
1. Engine oil replacement
Engine oil should be replaced after the initial
'running in' period and at the intervals specified
in the Service Schedule.
Note: Engine oil is easier to replace when the engine
has been run up to temperature and the oil is warm.
• Ensure that the engine is positioned on a hard level
surface.
• Remove the oil filler cap. (Fig. 11)
• Place a suitable oil collection pan under the engine.
• Remove the oil drain plug so that the oil can drain
completely from the engine. (Fig. 12)
www.evolutionpowertools.com