Use of Optional Evolution Accessories
(available as a customer purchase option)
Evolution Paving Pad
Using the Paving Pad allows the operator to compact/settle Driveway Paving, Block Paving and
Patio Slabs etc without the risk of damage or scratching to the decorative top surface of the
pavings by the steel vibration pad.
Note: The Paving Pad has a plate hook to the front, and a plate clamp to the rear.
To fit the Paving Pad:
• Hook the Paving Pads plate hook over the front of the vibration plate.
• Clamp the plate clamp over the rear of the vibration plate.
Note: You may find it helpful to remove the large 'inside' steel rear clamping plate from the
plastic Paving Pad.
• Remove the two (2) 13mm AF bolts and locking nuts. Store safely for future use.
• Position the plastic Paving Pad on the vibration plate.
• Clamp the rear of the Paving Pad to the vibration plate using the large steel plate clamp and
the two (2) 13mm AF bolts and locking nuts.
• Tighten the 13mm AF nuts and bolts securely.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice.
www.evolutionpowertools.com
25