Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Harvest:
During the harvest cycle the compressor
is still operating,
but the water pump
has stopped. Two other components
have been energized:
the hot gas valve and the water
inlet valve. These two valves open and warm up the freezing surface, allowing the cubes to
fall into the bin. The freeze cycle will restart when all the cubes have been harvested.
How the machine
uses water:
Evaporator
/
Water pump
J
Compressor
/
/
4
Water inlet valve
freezing
portion
of the ice-making
cycle, the water in the sump
concentrated
with mineral impurities.
The
ice
maker
begins
with a fixed
charge of water that
is contained
in the
water sump. As the
water
is
sprayed
against
the freezing
evaporator
surface,
the portion of water
that does not contain
mineral
impurities
will freeze and stick
to the ice cube molds.
The water containing
impurities
falls back
into the water sump.
Gradually, during the
will become
highly
During the harvest cycle, fresh water flows into the machine to dilute the bin water and
rinse the concentrated
minerals down the drain.
Normal Soumls
Your new ice maker may make sounds
that are not familiar to you. Most of the new
sounds
are normal.
Hard surfaces
like the floor and walls can make the sounds seem
louder than they actually are. The following
describes
the kinds of sounds that might be
new to you and what may be making them.
You will hear a swooshing
sound when the water valve opens to fill the water sump
for each cycle.
Rattling noises may come from the flow of the refrigerant
or the water line. Items
stored on top of the ice maker can also make noises.
The high-efficiency
compressor
may make a pulsating
or high-pitched
sound.
16

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fim90Fim120

Tabla de contenido