Franklin Chef FIM70 Manual Del Usuario página 5

• The icemakershouldnot belocated nextto ovens,grills or othersources of high heat.
• The ice makermustbeinstalledwith all electrical,wateranddrain connections in
accordance with stateandlocal codes.A standard electricalsupply(115VAC only,
60 Hz, 15A), properlygrounded in accordance with theNationalElectricalCodeand
local codesandordinances is required.
• Do not kink or pinch thepower supplycordor drain lines between the ice makerand
the cabinet.
• The fuse(or circuit breaker)sizeshouldbe 15amperes.
• It is importantfor theice makerto beleveledin orderto work properly.You may
needto makeseveral a djustments to level it.
• All installationsmustbe in accordance with local plumbing coderequirements.
• Make certainthatthe hosesarenot pinchedor kinked or damaged duringinstallation.
• Checkfor leaksafterconnection.
• Neverallow childrento operate,play with or crawlinsidethe ice maker.
• Although theunit hasbeentestedat the factory,dueto long-termtransit andstorage,
the first batchof cubesmustbediscarded.
• Neverturn the watersupplytapoffwhen the ice makeris working.
• If the ice makerwill not beusedfor a long time, beforethenext useit mustbe
thoroughlycleaned. F ollow carefullyany instructions providedfor cleaningor useof
sanitizingsolution.Do not leaveanysolutioninsidetheice makeraftercleaning.
• DO NOT touchthe condenser f ins. Thecondenser f ins aresharpandcanbeeasily
damaged.
• DO NOT usesolvent-based c leaningagentsor abrasives on the interior. These
cleanersmaytransmittasteto theice cubes,or damage or discolortheinterior.
• The ice machinecleanercontainsacids.DO NOT useor mix with anyother
solvent-based c leanerproducts. U serubberglovesto protecthands.Carefullyreadthe
materialsafetyinstructionson the containerof the ice machinecleaner.
• Do not usethis apparatus for otherthanits intendedpurpose.
SAVE THESE INSTRUCTIONS
Electrical Connection
Do not, under any circumstances, cut or remove the third (ground) prong from the power
cord. For personal safety, this appliance must be properly grounded. The power cord of
this appliance is equipped with a 3-prong grounding plug that mates with a standard
3-prong grounding wall outlet to minimize the possibility of electric shock hazard from
the appliance. Have the wall outlet and circuit checked by a qualified electrician to make
sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered,