Setting Spool Pins; Presser Foot Lifter; Thread Cutter; Accessory Kit - Sears Kenmore 85.12314 Manual De Instrucciones

Setting Spool Pins (- _,
(_) Spool pin
The spool pins are used for holding the spools of
thread when feeding thread to the machine
To use, pull up the spool pins Push down for storage.
Presser Foot Lifter
(_ Presser foot lifter
(_) Normal up position
(_ Highest position
The presser foot lifter raises and Rowersyour presser foot,
You can raise it about 1/4" (O,6cm) higher than the nor-
mal up position for easy removal of the presser foot or to
help you place heavy fabric under the foot.
Thread Cutter
(_ Thread cutter
You do not need a pair of scissors to cut threads after
sewing, Just use the built-in thread cutter
,J
Accessory Kit
Standard accessories are located inside the extension
table,
Standard accessories are in plastic bag,
J