Fermax way slim Manual De Instalador página 20

1. Monitor
1.1 Parts
Microphone
Talk/On button
1.2 Functions
LCD touch screen
Unlock button
Talk/On button
Microphone
Connection port
Speaker
1.3 Connection port
Connectors
Bit
BUS
DIP1&2
SW+, SW-
DIP3
RING,GND,NC
Dipswitches
Bit
DIP1&5
DIP1&2
DIP6
DIP3
-1-
COD. 970022b
LCD Screen
Unlock button Speaker
Display the visitors' image
Press to release the door
Press to communicate hands free with visitor
Press to view the outdoor condition in standby mode
Receive voice from the user
Bus terminal, Doorbell button terminal, DIP Switches
Send out voice from the visitor
Confi guration
Bit State
Bus terminal.
Reserved. left to default.
1 2 3
ON
Door bell call button connection port.
Set to OFF. When the monitor is in the middle of the line in daisy chain connection.
1 2 3
NC GND RING sw- sw+
ON
Reserved.
Set to ON. When the montior is at the end of the line or connected to a DBC4S.
1 2 3
sw- sw+
NC GND RING
ON
Confi guration
Bit State
Monitor address.Set at the factory.
ON DIP
Reserved. left to default.
1 2 3
1 2 3 4 5 6
ON
Set to OFF. Monitor installed in intermediate position.
ON DIP
Set to OFF. When the monitor is in the middle of the line in daisy chain connection.
1 2 3
1 2 3 4 5 6
ON
Set to ON. Monitor installed at the end of the installation (last).
ON DIP
Set to ON. When the montior is at the end of the line or connected to a DBC4S.
1 2 3
1 2 3 4 5 6
ON
V01_17
Mounting hook
NC GND RING sw- sw+
NC GND RING SW- SW+
Description
Description
Description
Description
Connection port