Unlock Time Setting - Fermax way slim Manual De Instalador

13. Setup

13.1 Unlock Time Setting

Power up within 5 seconds,
press and hold the "B"
button for 3 seconds, this
will enter the setting menu.
backlight indicator
(blinking)
Notes: 1. You can see how to program the lock-release time from the monitor in chapter 11.2.
2. During this time, the card reader blinks and beeps once a second. .
-13-
A
beep + beep
B
A
Note: For 1 way doorstation, open front
cover to fi nd button B.
Within 5 seconds, press and hold the
"A" button for 3 seconds, this will
enter the lock time settings.
backlight indicator
(off)
Press and hold the "B" button for the
time required. The length of the press
will equal the door release time (range
1~99s).
backlight indicator
(blinking once per second) beep once per second
beep