Beurer AS 95 Pulse Instrucciones De Uso página 44

It is only possible to measure heart rate if the activity sensor is NOT in
sleep mode. If the activity sensor does not have enough battery charge,
measurement. You must first charge the battery to be able to take a heart
rate measurement.
1. To start the heart rate measurement, press the button repeatedly until
2. If you press and hold the button for 3 seconds,
display and the activity sensor starts to record the heart rate. Once the activity
sensor has recorded a heart rate, it appears in the display
sensor does not record a heart rate after 30 seconds,
the display. In this case, check whether the light sensor on the rear has sufficient
contact with the skin and is free of skin particles and dust. Then press the button
again to activate the heart rate measurement.
3. To stop the heart rate measurement, press and hold the button for 5 seconds.
Heart rate training ranges
Whilst your current heart rate is shown in the display of the activity sensor, the
activity sensor also alternately shows your current training range. The maximum
heart rate is automatically derived from the following formula: 220 − age = maxi-
appears in the display and you cannot take a heart rate
appears in the display.
appears in the display.
44
appears in the
. If the activity
appears in