Operating Elements And Connections; Safety Notes - Monacor STA-200D Manual De Instrucciones

Digital Stereo PA Amplifier
These instructions are intended for users without
any specific technical knowledge . Please read
these instructions carefully prior to operating the
unit and keep them for later reference .
All operating elements and connections
described can be found on the fold-out page 3 .
1 Operating Elements
and Connections
1 Input PLAYER (3 .5 mm jack, stereo) with
adjustable sensitivity
2 Control GAIN for the sensitivity of the input
PLAYER
3 Input selector switches INPUT SELECT
4 Volume control LEFT for the left channel
5 LED indicators
ON
PROTECT
OVERHEAT – overheating of amplifier
CLIP
6 Volume control RIGHT for the right channel
7 POWER switch
8 Mains jack for connection to a socket
(230 V/ 50 Hz) via the mains cable provided
9 Support for the mains fuse
Always replace a blown fuse by one of the
same type .
10 Inputs 1 – 4 (RCA jacks)
11 Terminals for the speakers
12 Speaker jacks (Speakon
Note: Connect 4 Ω speakers either to the
terminals or to the speaker jacks . 8 Ω speak-
ers may be operated at the terminals and at
the speaker jacks at the same time .
8
– amplifier switched on
– activation of protective circuit
– overload of amplifier
compatible)
®

2 Safety Notes

This unit corresponds to all relevant directives of
the EU and is therefore marked with
WARNING The unit uses dangerous mains
voltage . Leave servicing to skilled
personnel only and do not insert
anything into the air vents . In-
expert handling may result in
electric shock .
•
The unit is suitable for indoor use only . Protect
it against dripping water and splash water,
high air humidity and heat (admissible ambient
temperature range: 0 – 40 °C) .
•
Do not place any vessel filled with liquid on
the unit, e . g . a drinking glass .
•
The heat generated inside the unit must be
dissipated by air circulation; never cover the
air vents of the housing .
•
Do not operate the unit or immediately discon-
nect the mains plug from the socket
1 . if the unit or the mains cable is visibly dam-
aged,
2 . if a defect might have occurred after the
unit was dropped or suffered a similar
accident,
3 . if malfunctions occur .
In any case the unit must be repaired by skilled
personnel .
•
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the
plug .
•
For cleaning only use a dry, soft cloth; never
use water or chemicals .
•
No guarantee claims for the unit and no liabil-
ity for any resulting personal damage or mate-
rial damage will be accepted if the unit is used
for other purposes than originally intended, if
it is not correctly connected or operated, or if
it is not repaired in an expert way .
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment .
.