Sony HSR-X200 Manual De Instrucciones página 18

Basic OSD Operations
To set an item
1
When setting the highlighted item, simply turn the
Shuttle dial clockwise.
The current setting begins to flash.
<LANGUAGE/LANGUE/SPRACHE/IDIOMA>
ENGLISH
<CLOCK SET>
22-01-2001 MON 09:01:00
<SUMMER TIME SET>
MODE
WEEK
ON LST-SUN
0FF LST-SUN
<EXT. CLOCK SET>
ADJUST. TIME : 01:00
<LANGUAGE/LANGUE/SPRACHE/IDIOMA>
ENGLISH
<CLOCK SET>
22-01-2001 MON 09:01:00
<SUMMER TIME SET>
MODE
WEEK
ON LST-SUN
0FF LST-SUN
<EXT. CLOCK SET>
ADJUST. TIME : 01:00
Or, select the item to be set by moving the
highlighting with the Jog dial, and turn the Shuttle
dial clockwise to finalize your selection.
On the line where multiple inputs are required, the
first column begins to flash.
<LANGUAGE/LANGUE/SPRACHE/IDIOMA>
ENGLISH
<CLOCK SET>
22-01-2001 MON 09:01:00
<SUMMER TIME SET>
MODE
WEEK
ON LST-SUN
0FF LST-SUN
<EXT. CLOCK SET>
ADJUST. TIME : 01:00
18
(GB)
: NO USE
MONTH TIME
O3 02:00
10 02:00
: NO USE
MONTH TIME
O3 02:00
10 02:00
: NO USE
MONTH TIME
O3 02:00
10 02:00
<LANGUAGE/LANGUE/SPRACHE/IDIOMA>
<CLOCK SET>
22-01-2001 MON 09:01:00
<SUMMER TIME SET>
MODE
WEEK
ON LST-SUN
0FF LST-SUN
<EXT. CLOCK SET>
ADJUST. TIME : 01:00
2
To change the setting at the flashing line or
column, turn the Jog dial.
The values (settings) you can select for the flashing
line or column are displayed in sequence.
3
When the desired value (setting) is displayed, turn
the Shuttle dial clockwise to register the new value
(setting).
The next column, if any on the same line, starts
flashing. Set it in the same manner.
By turning the Shuttle dial counterclockwise, you can
reverse the setting procedure.
When the setting(s) on one line ends, the next line you
can set will be highlighted when you turn the Shuttle
dial clockwise.
To return the settings to the defaults
Press the Menu Reset button on the front panel using a
thin pointed implement.
All the settings of the menu item being displayed on
the monitor screen will return to their factory-set
values.
To exit Menu mode
Press the EXIT/OSD button.
Storing the menu settings
The values set with the menus can be stored on a
memory stick as data and loaded to resume the settings
when required.
For the operation, see "Saving/Loading the Menu Settings"
on page 44(GB).
ENGLISH
: NO USE
MONTH TIME
O3 02:00
10 02:00