Zooming In On An Image; Multiplexer Channel Selection - Sony HSR-X200 Manual De Instrucciones

Zooming in on an Image

The ZOOM button enables you to zoom to a certain
area of the playback picture on the monitor screen.
1
Press the ZOOM button.
The zone cursor to specify the area to zoom
appears.
Zone cursor
2
Turn the Jog dial to move the zone cursor
horizontally to the desired position and turn the
Shuttle dial clockwise to register the setting of the
horizontal position.
3
Turn the Jog dial to move the zone cursor
vertically to the desired position and turn the
Shuttle dial clockwise.
The image in the zone cursor is enlarged and displayed
full-screen.
17-11-01
02:36:00 HI-0.12SEC
In Zoom mode, the indicator of the ZOOM button
lights.
To cancel Zoom mode
Press the ZOOM button again.

Multiplexer Channel Selection

When a multiplexer whose channel information can be
decoded, such as a Sony YS-DX516/DX516P, has
been connected, you may select a certain channel
(camera) for playback.
1
Set the unit to Still-Picture mode and press the
CHANNEL button.
The CHANNEL button indicator lights (Channel
Select mode) and the channel input display
appears.
PLEASE SELECT CHANNEL
** CHANNEL
CHANGE WITH JOG, SET WITH SHUTTLE
2
Turn the Jog dial to select the channel (camera
number), and turn the Shuttle dial clockwise to
register your selection.
Channel Select mode is released and the selected
channel is displayed.
To cancel the multiplexer channel
Press the CHANNEL button again.
35
(GB)