Assembling The Stand; Assembly Procedure - Pioneer PDK-1013 Manual De Instrucciones

Assembling the Stand

Note
Always assemble it on a flat table etc.
Insert the screws in the holes vertically and do not tighten
them with more force than necessary.

Assembly Procedure

1
Secure the support column to the stand
with the Installation screws 1 (4 locations
on the left and right).
Using the enclosed hexagonal wrench, first loosely
attach the top attachment screw, then loosely attach
the bottom attachment screw.
The larger holes
are on the front.
Installation screws
(M8 x 16 mm: silver)
2
Fully tighten the Installation screws (4
locations on the left and right).
Fully tighten the attachment screws.
Note
Be sure to carefully store the unused support columns, the
hexagonal wrench, the C wrench, and the Operating
Instructions together.
4
En
1