Stihl MS 880 Manual De Instrucciones página 50

5
6
2
1
4
3
6
: Use a screwdriver to remove
the E-clip (1).
: Take off the washer (2) and rim
sprocket (3).
:
Examine splines on clutch drum (4)
– if wear marks are severe, fit a new
clutch drum.
:
Pull clutch drum or spur sprocket
(5) and needle cage (6) off the
crankshaft.
MS 880
Installing spur sprocket /
rim sprocket
:
Clean the crankshaft stub and
needle cage, and lubricate with
STlHL grease ("Special
Accessories").
: push needle cage on to crankshaft
:
After fitting clutch drum or spur
sprocket, rotate it about one turn to
engage oil pump drive.
:
Fit rim sprocket with cavities facing
outward.
:
Refit washer and E-clip on the
2
crankshaft.
1
English / USA
49