Sleep Mode; Selecting The Operating Mode; Continuous Replay Of All Titles And Single Title Replay; Relay Mode - Automatic Start Of The Other Player Unit At The End Of A Title - IMG STAGELINE DMP-240 Manual De Instrucciones

3) To return to the automatic counting mode, keep
the button TAP pressed until the indication
"AUTO" reappears.

5.3.3 Sleep mode

If the player is set to pause for more than 20 min-
utes, it will go to sleep mode. The display will show
and all illuminated buttons will be extin-
guished. Press any button to return to the previous
operating mode.

5.4 Selecting the operating mode

5.4.1 Continuous replay of all titles and
single title replay
In the continuous replay mode, the display will
show "CONTINUE" (D); in the single title replay
mode "Auto-CUE" (C). The single title replay is spe-
cially provided for DJ applications:
1. After selecting a title, the player will be set to
pause precisely on the spot where the music
starts (not at the time index 0:00:00). This spot
will be automatically stored as a starting point.
The display will show "CUE" (J). To return to this
starting point, press the button CUE (17) after
starting the title.
2. After replaying a title, the player will be set to
pause precisely on the spot where the music of
the next title starts. This spot will then be stored
as a new starting point.
To switch over between continuous replay and sin-
gle title replay:
1) Press the button MODE (9). The display will
show and
2) Press the knob TRACK / ENTER (7). The display
will show and
3) Turn the knob TRACK / ENTER to switch over
between continuous replay "CONTINUE" (D)
and single title replay "Auto-CUE" (C).
4) To return to the time indication, press the button
BACK (8).
5.4.2 Relay mode – Automatic start of the
other player unit at the end of a title
To start the other player unit automatically at the
end of a title:
1) Set both player units to single title replay
( chapter 5.4.1): Both displays (14) must
show "Auto-CUE" (C).
2) Select a title on each player unit.
3) Press the button RELAY (3). The button will light
up.
.
.
4) Start the replay on one of the player units with
the button (18). The other player unit must
be set to pause [indication
a title, the player unit will be set to pause and the
other player unit will start. This procedure will be
continuously repeated until the relay mode is
deactivated. (To deactivate the relay mode,
press the button RELAY once again.)
5) During the relay mode, it will also be possible at
any spot of the title to switch over the replay
from one player unit to the other with the but-
ton .
Note: If you press the button CUE (17) in this mode on the
player unit currently replaying, the replay will change to the
other player unit. If the button CUE is kept pressed on the
player unit set to pause, the replay from this player unit will
be continued until the button is released.

5.5 Short replay of a title beginning

For short replay of a title beginning, keep the button
CUE (17) pressed. After releasing the button, the
player will return to the title beginning and will be
set to pause.
1) Set the player to pause with the button
2) Select the desired title with the knob TRACK /
ENTER (7).
3) For short replay of a title beginning, keep the
button CUE pressed.
4) To replay the title, press the button

5.6 Fast forward / reverse

For fast forward / reverse of a title, press the button
SEARCH (6) first. The text line (N) will show
. Turn the jog wheel REV/ FWD (16) in
the corresponding direction. The forward / reverse
speed will depend on the turning speed of the jog
wheel.
Notes
1. In the pause mode, after fast forward/reverse, the cur-
rent spot will be constantly repeated. To stop repeating,
either shortly press the button CUE (17) twice (new
Cue point will be set,
with the button (18).
2. If the jog wheel is not turned for 8 seconds in the replay
mode, the indication
jog wheel will be used again for the function "Pitch
Bend" (chapter 5.10).
(H)]. At the end of
(18).
.
chapter 5.8) or start the replay
will disappear and the
GB
19