Safety Notes; Applications - IMG STAGELINE DMP-240 Manual De Instrucciones

17 Button CUE for short replay of a title beginning
GB
( chapter 5.5) and for return to a certain spot
( chapter 5.8)
18 Button to start a title and to switch over
between replay and pause
19 Button A to define the starting point of a contin-
uous loop
20 Button B / EDIT to define the end point of a sec-
tion for replay of a continuous loop and simulta-
neous start of the loop;
to displace the end point, press the button once
again and set the end point with the jog wheel
(16)
21 Button RELOOP/ EXIT to exit the continuous
loop or to replay the loop once again
22 Button AUTO for a continuous loop of the length
of a multiple of a beat length
23 Button TAP for the manual counting mode of the
beat counter and for returning to the automatic
mode ( chapter 5.3.2)
24 Sliding control to change the speed [without
changing the pitch when the button MT (11) is
pressed]; the adjustment of the control will only
be effective when the button PITCH (13) is
pressed
25 Jack 9 V~ for power supply via the power supply
unit provided
26 Audio output LINE OUT of the player unit 2 for
connection to the line input e. g. of an amplifier
or a mixer
27 3.5 mm jack FADER START of the player unit 2
for remote control of the function Start / Pause
from a mixer (
28 Audio output LINE OUT of the player unit 1
29 3.5 mm jack FADER START of the player unit 1

2 Safety Notes

The units (MP3 player and power supply unit) cor-
respond to all required directives of the EU and are
therefore marked with
WARNING
The power supply unit uses danger-
ous mains voltage. Leave servicing
to skilled personnel; inexpert han-
dling may result in electric shock.
16
chapter 6)
.
Please observe the following items in any case:
G
The units are suitable for indoor use only. Protect
them against dripping water and splash water,
high air humidity, and heat (admissible ambient
temperature range 0 – 40 °C).
G
Do not place any vessel filled with liquid on the
units, e. g. a drinking glass.
G
Do not operate the MP3 player or immediately
disconnect the power supply unit from the mains
socket
1. if the MP3 player or the power supply unit is
visibly damaged,
2. if a defect might have occurred after a unit was
dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the units must be repaired by skilled
personnel.
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
G
No guarantee claims for the units and no liability
for any resulting personal damage or material
damage will be accepted if the units are used for
other purposes than originally intended, if they
are not correctly connected or operated, or if they
are not repaired in an expert way. Likewise, no
liability will be accepted for operating errors or for
data loss caused by a defect and for any conse-
quential damage of this data loss.
If the units are to be put out of operation
definitively, take them to a local recycling
plant for a disposal which is not harmful to
the environment.

3 Applications

The MP3 player DMP-240 with two player units is
specially designed for professional DJ applications.
Many functional features have precisely been
matched to this range of application, e. g. single title
replay, automatic beat counter, seamless replay of a
continuous loop, change of speed without displacing
the pitch. Two ports for USB storage media (USB
flash drive, hard disk, etc.) are provided for replay-
ing music titles in MP3 format. The player units will
be able to access the ports independently so that
operation with a single USB storage medium will
also be possible.