Precise Selection Of A Certain Spot; Return To A Certain Spot; Changing The Speed With Or Without Displacing The Pitch; Pitch Bend - Matching The Beat Between Two Music Pieces - IMG STAGELINE DMP-240 Manual De Instrucciones

5.7 Precise selection of a certain spot

GB
It will be possible to select a spot in a title with the
precision of one frame (
ing the replay from a certain spot instead of starting
it from the beginning of a title.
1) When the desired spot is roughly reached by
replaying the title or by using fast forward /
reverse (
pause with the button
2) Precisely select the spot by turning the jog
wheel (16) clockwise and counter-clockwise.
The current spot will be constantly repeated.
3) When the desired spot has been set, shortly
press the button CUE (17) twice. Thus, the spot
will be stored and repeating will end. The replay
will then be started from this point with the but-
ton .
5.8 Return to a spot certain spot
To quickly find a certain spot, store a starting point
(Cue point) with the button CUE (17):
Notes: In the single title replay mode, return with the but-
ton CUE will be possible within a title only. When the next
title is reached, the Cue point will be replaced by the start-
ing point of the next title (
1) While replaying a title, set the player to pause
with the button
where the player is to return to later. The buttons
and CUE (17) will flash.
2) If required, select the spot more precisely with
the jog wheel (16) [
will then be continuously repeated.
3) Shortly press the button CUE. Thus, the spot
will be stored as a Cue point. The display will
show "CUE". (J). If the current spot is replayed,
shortly press the button CUE again to mute the
sound. The button CUE will light continuously.
The button
start the replay.
4) Restart the replay with the button
Do not select another title with the knob TRACK /
ENTER now; otherwise the Cue point will be
replaced by the starting point of the title selected.
5) It will now be possible to return to the Cue point
with the button CUE: The player unit will then be
set to pause.
6) Start the replay with the button
button CUE once again and keep it pressed.
After releasing the button CUE, the player unit
will be set to pause again at the Cue point.
When the button CUE is kept pressed again,
repeating from the Cue point will be possible as
many times as desired.
20
1
⁄ second), e. g. for start-
75
chapter 5.6), set the player to
(18).
chapter 5.4.1).
(18) when the spot is reached
chapter 5.7]. This spot
will keep flashing as a prompt to
or press the
5.9 Changing the speed with or without
displacing the pitch
To change the speed with the sliding control (24) by
±16 % max.:
1) Select the adjusting range with the button
PITCH (13): ±8 % or ±16 %. The LEDs (15) will
indicate the range selected. If the LED "16%"
lights up and the button PITCH is pressed
again, the speed control will be deactivated and
the title will be replayed at normal speed. The
text line (N) will shortly show the setting se -
lected.
2) Adjust the speed with the sliding control. The
display will show the percentage deviation from
the standard speed at the top on the right (G).
The number of beats (Q) will change accord-
ingly.
3) If you change the speed, the pitch will also
change proportionally. To keep a constant pitch,
press the button MT (11). The display will show
"MT" (R). To deactivate the function, press the
button MT once again.
5.10 Pitch Bend – Matching the beat
between two music pieces
It will be possible to precisely synchronize the
beats of two music pieces with the same speed.
Thus, the dancing rhythm will not be interrupted
when crossfading from one player unit to the other.
1) First use the speed control (24) to match the
speed of the music piece to which crossfading is
desired to the speed of the current music piece.
For this purpose, set the same number of beats
per minute (BPM) with the sliding control, see
indication (Q) at the bottom on the right of the
display.
2) Synchronize the beats of the music piece to
which crossfading is desired to those of the cur-
rent music piece with the buttons PITCH BEND
(12): As long as the button + or - is kept
. Caution:
pressed, the replay of the title will be faster or
slower and the LED "16 %" (15) will flash. Thus,
the beats will be displaced with respect to the
beats of the current music piece.
3) The beats will also be displaced when the jog
wheel (16) is turned.