Replacement Bobbins; Bobbin Winding; Removing Bobbin Case - Sears Singer Manual De Instrucciones

Tabla de contenido

Publicidad

Rep lacement
Bobbins
Only use bobbins purchased through Sears Stores, stock No.
6870 or Sears Service Centers, Parts No. 102869107.
Bobbin Winding
• Removing bobbin case
Remove the extension table from the machine by pulling
it to the left. Open the shuttle cover_by
pulling down
the embossed part on the left of the cover.
Raise the needle to its highest position by rotating the
handwheel toward you.
Shuttle cover
Bobbin case
To remove the bobbin case _from
the shuttle, pull open
the latch of the bobbin case. Pull the bobbin case straight
out of the shuttle.
J
• Bobbin winding
[] Release the clutch by pulling out the handwheel. This
will stop the needle from moving while you wind the
bobbin.
[]
J
[] Draw thread from spool.
[] Guide the thread around the thread guide.
[] Thread through the hole in the bobbin from the inside to
the outside.
[] Put the bobbin on the bobbin winder spindle.
[]
[]
[]
14

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

384.13016300

Tabla de contenido