Rick-Rack Stretch; Overcast Stretch Stitching; Starting To Sew - Sears Singer Manual De Instrucciones

Rick- rack Stretch
(_ Stitch selector: C
(2) Stitch length: Stretch stitch position
Needle thread tension: 1 to 4
_) Presser foot: Zigzag foot
C
PATTERN: C LENGTH: S,S,
Sew on stretch fabrics in any area that you might use a
zigzag stitch. This stitch is used as a decorative topstitch
as well.
S
Overcast Stretch Stitch ing
(_ Stitch selector: E or F
(_ Stitch length: Stretch stitch position
(_ Needle thread tension: 1 to 4
(_ Presser foot: Zigzag foot
E F
PATTERN: E LENGTH: S,S,
® @
This stitch is for sewing a seam with an overcast finish. It is
used when making swim wear, ski pants and other
garments which require stretch.
• Starting to sew
Place raw edge of fabric to the" left" of the needle as
shown. Sew in a manner so that the needle pierces the
fabric very close to the outside edge. Or place the fabric
to allow a 5/8" (1.6 cm) seam, then trim seam allowance.
Raw or worn edges of older garments can be overcasted
to prevent further raveling.
S
42