Description Of Tyre Changer - Corghi Artiglio 500 Manual De Uso

- Keep unauthorised persons well clear of the area of operations.
- Make sure the machine has been installed in compliance with all relevant regulations
and legislation.
- Make sure that all machine operators are suitably trained, that they are capable of using
the equipment correctly and that they are adequately supervised.
- Never leave nuts, bolts, tools or other equipment on the equipment; they may become
entrapped between moving parts.
- Not touch power lines or the inside of electric motors or other electrical equipment
until the power supply has been disconnected.
- Read this manual carefully and learn how to use the machine correctly and safely.
- Always keep this operator's manual in an easily accessible place and consult it whenever
necessary.
WARNING
Do not remove or deface the Danger, Warning or Instruction decals. Replace any
missing or illegible decals. If one or more decals have been detached or damaged,
replacements can be obtained from your nearest dealer.
- When using and carrying out maintenance on the machine, observe the standardised
industrial accident prevention regulations for high voltages.
- Unauthorised alterations or changes to the machine relieve the constructor of all liability
for any consequent damage or accidents. Specifically, tampering with or removing the
safety devices is a breach of the regulations for safety in the workplace.
- The user must wear personal protection equipment such as gloves, safety footwear and
goggles.
WARNING
When operating or servicing equipment tie back long hair and do not wear loose-
fitting clothes, ties, necklaces, rings or wristwatches which could become entrapped
by moving parts.

DESCRIPTION OF TYRE CHANGER

The machine is an electro-pneumatic universal tyre changer, suitable for complete
wheels with weights and dimensions shown in the technical data paragraph.
It is designed to work effectively on:
- Conventional wheels;
- Reverse rim wheels or wheels without central well - (using optional kit);
- Runflat tyre with reinforced side*
* WARNING: Special working procedures have been specifically studied for these wheels'
systems.
N.B. Clamping and/or demounting wheels in the vintage car category (cars out of production for more than
30 years) and some types of rally wheels and wheels of cars approved only for off-road use may be difficult and
occasionally even impossible.
52
Operator's manual Artiglio 500