Deciding From Which Side Of The Wheel The Tyre Must Be Demounted - Corghi Master J Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

After turning on the machine, "Att" will appear on the
screen (see Fig. 27).
Press any of the numerical value input keys on the
keypad to reset the machine.
6.3. DECIDING FROM WHICH SIDE OF THE WHEEL THE TYRE
MUST BE DEMOUNTED
See Fig. 28. Find the position of rim well A on the rim.
Find the largest width B and the smallest width C.
The tyre must be mounted and demounted with the
wheel on the turntable with the smallest width side
C facing upwards.
See the paragraph "TABLE FOR USING CENTRING AND CLAMPING ACCESSORIES
ACCORDING TO RIM TYPE" in this manual.
When working with "easily deformable" rims
(i.e. a central hole with thin, projecting edges -
see Fig. 28A) we recommend using the universal
flange for closed rims (see the section "TABLE
FOR USING CENTRING AND CLAMPING AC-
CESSORIES ACCORDING TO RIM TYPE" in this
manual).
SPECIAL WHEELS
Alloy rim wheels: some wheels with alloy rims
have a minimum A rim well or do not have any
well - Fig. 28B. These rims are not approved by
DOT standards (Department of Transportation).
The DOT initials certify that tyres comply with the
safety standards adopted by the United States
and Canada (these wheels cannot be sold in
these markets).
Artiglio Master J Operator manual
WARNING
A
27
C
A
B
28
28A
EN
28B
125

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

4-118263d

Tabla de contenido