Safety Notes; Applications; Mounting - IMG STAGELINE RGBL-120DMX Manual De Instrucciones

– Selection of the show programmes 1 to 8 and the
colour transition function with button FUNCTION
The LED of button MODE flashes slowly.
– Adjustment of the running speed for the selected
programme in three steps
The LED of button MODE flashes quickly.
Note: For control via the remote control no DMX signal must
be present at the DMX INPUT (15).

2 Safety Notes

The unit corresponds to all required directives of the
EU and is therefore marked with
WARNING The unit uses hazardous mains voltage
(230 V~). Leave servicing to skilled per-
sonnel only and do not insert anything
into the air vents; inexpert handling may
result in electric shock.
Please observe the following items in any case:
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity, and heat (admissible ambient temperature
range 0 – 40 °C).
G
Do not place any vessels filled with liquid, e. g. drink-
ing glasses, on the unit.
G
Do not operate the unit or immediately disconnect
the mains plug from the mains socket
1. if the unit or the mains cable is visibly damaged,
2. if a defect might have occurred after the unit was
dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the unit must be repaired by skilled per-
sonnel.
G
Never pull the mains cable for disconnecting the
mains plug from the mains socket, always seize the
plug.
G
For cleaning only use a dry, soft cloth, never use
chemicals or water.
G
No guarantee claims for the unit and no liability for
any resulting personal damage or material damage
will be accepted if the unit is used for other purposes
than originally intended, if it is not safely mounted or
not correctly operated, or if it is not repaired in an
expert way.
G
Important for U. K. Customers!
The wires in this mains lead are coloured in accord -
ance with the following code:
green/yellow = earth
blue = neutral
brown = live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows:
1. The wire which is coloured green and yellow must
be connected to the terminal in the plug which is
.

3 Applications

The light effect unit RGBL-120DMX is suitable for
applications on stage, in discotheques, and party
rooms. As a light source, it has 384 super bright LEDs
lighting in red, green, and blue. They have a low power
consumption, a low heat development, and a long life.
With the LEDs, colour transitions, running light and
stroboscopic effects are possible. Several RGBL-
120DMX units may be screwed together for a long light
band.
DMX light controller (27 DMX control channels, switch-
able to 24, 15, 9, 6, or 4 channels). However, it can
also be operated on its own or with the remote control
LC-3 available as an accessory.

4 Mounting

G
G
G
1) Screw the light effect panel with both mounting
2) To align the unit, release the setscrews of the
3) To obtain a long light band, it is possible to screw
marked with the letter E or by the earth symbol
or coloured green or green and yellow.
2. The wire which is coloured blue must be con-
nected to the terminal which is marked with the
letter N or coloured black.
3. The wire which is coloured brown must be con-
nected to the terminal which is marked with the
letter L or coloured red.
Warning – This appliance must be earthed.
If the unit is to be put out of operation defini-
tively, take it to a local recycling plant for a
disposal which is not harmful to the environ-
ment.
The light effect panel is designed for control via a
Always place the unit in such a way that a sufficient
air circulation will be ensured during operation.
Never cover the air vents on the housing (e. g. by
curtains).
The minimum distance to the illuminated object
should be 10 cm.
As the LEDs for the three primary colours are
arranged in several separate blocks, combinations
of these colours are only visible in surface illumina-
tion.
brackets (2) to a wall or ceiling.
mounting brackets. Adjust the desired inclination of
the unit and retighten the screws.
another RGBL-120DMX to the fixing plates (1) at
the left and right of the light effect panel. Two
matching mounting screws and a hexagon socket
screw key are supplied with the unit.
, GB
13