Fixing Outgoing Conductors; Fixing Conductors With Cable Terminal - Bolt Clamp Ofm Type - WEG FSW 400 Manual De Instrucciones

www.weg.net

3. FIXING OUTGOING CONDUCTORS

3.1. FIXING CONDUCTORS WITH CABLE TERMINAL - BOLT CLAMP OF
M TYPE
Take off the cover (acc. to chapter 1.3);
g
Take off the shields for terminals (acc. to chapter 1.5);
g
Fix the conductors with M10 screws (Figure 11) (20 Nm torque);
g
Break down appropriate elements of the shield for terminals (Figure 12, 13, 14, 15) and/
g
or (Figure 16, 17, 18, 19, 20);
Figure 12
Figure 16
Mount the shields for terminals (acc. to chapter 1.6);
g
Mount the cover (acc. to chapter 1.4).
g
14 Instruction manual for mounting and service of fuse switch disconnectors
Figure 11
Figure 13
Figure 17
Figure 14
Figure 18
Figure 15
Figure 19